Fiber Optics Essay Research Paper Fiber OpticsFiber

Fiber Optics Essay, Research Paper

Fiber Optics

Fiber Optic Cable Facts

“A relatively new technology with vast potential importance, fiber optics is the

channeled transmission of light through hair-thin glass fibers.”

[ Less expensive than copper cables

[ Raw material is silica sand

[ Less expensive to maintain If damaged, restoration time is faster

(although more users are affected)

[ Backbone to the Information Superhighway

Information (data and voice) is transmitted through the fiber digitally by

the use of high speed LASERs (Light Amplification through the Simulated Emission

of Radiation) or LEDs (Light Emitting Diodes). Each of these methods create a

highly focused beam of light that is cycled on and off at very high speeds.

Computers at the transmitting end convert data or voice into “bits” of

information. The information is then sent through the fiber by the presence, or

lack, of light. Computers on the receiving end convert the light back into data

or voice, so it can be used.

ORIGIN OF FIBER OPTICS

Information (data and voice) is transmitted through the fiber digitally by

the use of high speed LASERs (Light Amplification through the Simulated Emission

of Radiation) or LEDs (Light Emitting Diodes). Each of these methods create a

highly focused beam of light that is cycled on and off at very high speeds.

Computers at the transmitting end convert data or voice into “bits” of

information. The information is then sent through the fiber by the presence, or

lack, of light. So, all of the data is sent light pulses. Computers on the

receiving end convert the light back into data or voice, so it can be used.

All of this seems to be a very “modern” concept, and the technology we use

is. The concept though, was the idea of Alexander Graham Bell in the late 1800’s.

He just didn’t have a dependable light source… some days the sun doesn’t

shine! He thought of the idea that our voices could be transmitted by pulses of

light. The people who thought that audio, video, and other forms of data could

be transmitted by light through cables, were present day scientists. Most of

the things that are possible today, Alexander Grahm Bell could never even have

dreamed of.

Although the possibility of lightwave communications occurred to Alexander

Graham Bell (who invented the telephone), his ideas couldn’t be used until the

LASER or LED had been invented. Most of these advances occurred in the 1970s,

and by 1977 glass-purifying and other fiber-optic manufacturing techniques had

also reached the stage where interoffice lightwave communications were possible.

With further technological development, many intercity routes were in operation

by 1985, and some transoceanic routes had been completed by 1990. Now, in the

mid-90’s, worldwide connections are possible through the Internet.

The light is prevented from escaping the fiber by total internal

reflection, a process that takes place when a light ray travels through a medium

with an Index of Refraction higher than that of the medium surrounding it. Here

the fiber core has a higher refractive index than the material around the core,

and light hitting that material is reflected back into the core, where it

continues to travel down the fiber.

THE PROPAGATION OF LIGHT AND LOSS OF SIGNALS

The glass fibers used in present-day fiber-optic systems are based on

ultrapure fused silica (sand). Fiber made from ordinary glass is so dirty that

impurities reduce signal intensity by a factor of one million in only about 16

ft of fiber. These impurities must be removed before useful long-haul fibers can

be made. But even perfectly pure glass is not completely transparent. It weakens

light in two ways. One, occurring at shorter wavelengths, is a scattering caused

by unavoidable density changes within the fiber. In other words, when the light

changes mediums, the change in density causes interference. The other is a

longer wavelength absorption by atomic vibrations. For silica, the maximum