РефератыИностранный языкTqTqm Essay Research Paper TQM in Foodservice

Tqm Essay Research Paper TQM in Foodservice

Tqm Essay, Research Paper


TQM in Foodservice Introduction One of the most important industries overall


is the food industry. The food industry consists of everything from food processing


plants to fast food restaurants. The food industry affects nearly every living


person. Most people don’t realize how important this industry is and how it


affects their everyday lives. That is why it is so critical that the products


of this industry are at their highest quality, are free of bacteria and ensure


that the consumer will not face any detrimental consequences. Total Quality


Management (TQM) plays a big role in promising these results. Total Quality


Management seems to be a confusing term for the layman. TQM is a philosophy


advocated by Dr. Edward Deming, a world renowned quality guru. It was widely


accepted by Japan from 1950 onward. They used this principle for continuous


refinement of an organization-wide quality system. Since then many organizations


around the world have adopted TQM or similar methodologies. There have been


many successes and many reported failures. Success of the system depends on


the total commitment of the people to quality from top to bottom within the


organization. TQM implementation is based on team work and the philosophy of


continuous improvement. Statistics need to be used extensively to analyze and


reduce the variation in the process. In the food industry, continuous improvement


is vital to the survival of a specific company or restaurant. The customer is


constantly purchasing the products of competitors and any decline in quality


will equal a decrease in gross profits. There are several areas that a restaurant


may focus on for quality improvement such as menu offerings, hospitality, service,


cleanliness, and over all food quality. All of these aspects will be covered


in this paper concerning Total Quality Management. Summary Employee & Product


Quality Various well known companies such as Ritz-Carlton Hotels and Taco Bell


have implemented Total Quality Management programs in an effort to increase


quality and market share. Ritz-Carlton of Kansas City, Missouri, recently revamped


menu selections for its rooftop-level restaurant and bar operation. This came


about through customer surveys, focus-group studies of local restaurant patrons,


employee opinions, and market analysis. This began with the general manager,


Norm Howard, as TQM must start at the top to be successful. He states that “It


[TQM] is about listening to your customers and empowering your employees to


participate in important business decisions” (Stephenson, 1993). Taco Bell,


with the implementation of a Total Quality Management system, has improved its


speed of service, friendliness of service, and value for money ratings. This


company has done this by empowering employees and seeking customer input. By


integrating their employees into the system, Taco Bell has also decreased employee


turnover by 63% (Stephenson, 1993). According to the article “TQM: Making it


Work for You,” there are six areas that need to be focused on (Stephenson, 1993).


The first area is measuring quantitative results of various surveys and studies


and basing future decisions strictly on these outcomes. This information could


come from something as simple as a comment card, but these cards must tell the


business more than what was good and bad, but why. The second area to be focused


on is empowering the employees. Allowing the employees to be involved in the


team effort. Make the employees feel responsible for their actions and allow


the employees to fix their problems. This is where many franchises lack, making


it the manager’s responsibility to fix the problems that the employees create.


If management treats employees in a respectable manner, the employee will turn


around and treat the customer with respect also. Avoiding errors is the third


area that needs to be focused on. The main focus of a Total Quality Management


program is to eliminate errors before they can occur. Systems cause about 80%


of all errors, so if the system is error free, then the employee has a lesser


chance of making mistakes. Next comes the integration of management into the


process. Total Quality Management implies that management must be 100% in favor


of the program, or else the employees will not respond properly. Employees will


follow the lead of the management team. Last is to do what the customer want,


as tells the aphorism “The customer is always right.” This is the same principle.


There is no sense in serving only fried chicken if the customers demand a more


health conscious baked or grilled chicken. “Customers are not only the people


who walk through the doors looking for a meal but also your suppliers and employees”


(Stephenson, 1993). Health & Safety Quality Total Quality Management does not


just deal with product quality, but all around, or total quality. Another area


that quality needs to be continuously improved in is health and safety. Sky


Chefs, an airline caterer recently came to the conclusion that their workers’


comp. Costs were skyrocketing, so they incorporated their Total Quality Management


program to help solve these health and safety problems (Kay, Murphy, Harris,


1994). The main reason for business is profit, and if workers’ comp. Costs are


at unacceptable levels, that cuts out profit. Initially, the program focused


on injury prevention and set a goal of reducing workers’ compensation costs


by 50% in

three years. Task teams were initiated to collect data on estimated


future loss, loss sources and medical treatment patterns which would be evaluated


and used to eliminate hazardous areas of operation. They also gathered qualitative


data on employee and management attitudes and beliefs, current policies which


focus on potential hazards, and the physical environment. With this data, changes


were made and continuously updated with Sky Chef reaching their goal of a 50%


decline in less than 18 months (Kay, Murphy, Harris, 1994). The teams developed


several guidelines for improvements as follows: Incorporate safe work practices


into standard work processes; Involve line workers in all aspects of process


improvement, particularly safe work practices; Integrate and continuously improve


post-injury management processes; Communicate concern for employees; Create


a unified data base that could deliver timely, useful information to line managers;


Review vendors objectively and thoroughly; Institute criteria and time-based


medical care and disability management; Implement a comprehensive modified duty


program; Create a single managerial focus for loss prevention and work-related


injury management (Kay, Murphy, Harris, 1994). By following these directives,


a company could efficiently reduce workers’ compensation costs. They have earmarked


this as the Concern, Awareness, Responsibility, and Excellence program (C.A.R.E)


which is a safety communications program which involves and rewards the line


employees for committing safe acts (Kay, Murphy, Harris, 1994). One aspect that


these articles seem to have left out is the actual quality of the product, the


food. In food service classes and in the real world, one form of Total Quality


Management is known as the Hazard Analysis Critical Control Point, or the HACCP


system. This system was developed to ensure zero defects during food handling


by monitoring the whole preparation process. Its purpose is to identify and


correct errors before they happen. The old method of quality assurance was to


test the final product (TechniCAL 1996). If the product was not sufficient,


it was either held, reprocessed, or ultimately destroyed (TechniCAL 1996). This


method was costly, not only in an economic sense, but also timely. The HACCP


system monitors the food from the delivery point through-out storage and preparation


until consumption. It analyzes critical control points where extra precaution


may be needed with potentially hazardous foods. A flow chart is established


to determine which foods need to be analyzed at which times. Management and


employees alike must take this system very seriously and follow all steps which


includes assessing hazards, identifying critical control points, setting up


procedures for critical control points, monitoring critical control points,


taking corrective action, setting up a record-keeping system, and verifying


that the system is working (Educational Foundation of the National Restaurant


Foundation [EFNRA], 1992). This system is necessary to maintain a quality food


product and I feel is a part of Total Quality Management. According to Russell


Cross, industry guru on HACCP, the foundation between Total Quality Management


and HACCP are the same: “do it right the first time and every time and you get


a good final product” (1994). He also goes on to state that it is necessary


to check each step “along the process to make sure the product is safe and the


process is in control – instead of relying on the end product when it’s too


late to correct the problem” (1994). Conclusion The food industry is an industry


where it is a necessity that health and safety are given a number one priority,


and with a Total Quality Management system in place, it becomes much easier


to facilitate these needs. If any food product becomes contaminated it could


mean illness for any customer which consumes this product, which could bring


about lawsuits and even an Occupational Safety and Health Administration (OSHA)


investigation which could result in the closing of the business. I was part


of a management team at a local fast food restaurant and I feel that our employee


turnover rate was extremely high compared to other businesses in town. By implementing


a Total Quality Management system such as the one used by Taco Bell, these turnover


problems could subside to acceptable levels, along with increased customer satisfaction.


The three most important factors in any food service business are cleanliness


quality, and service. A Total Quality Management program, if implemented properly


from the top down, with everyone involved in the program believing in it, would


ensure the three factors are met and will constantly continue to improve. I


feel that this is a very important factor in an industry that is so diverse


and ever-changing.


Cross, Russell. (1994). What HACCP Really Means Available: http://ifse.tamu.edu/ifse/haccp.htm


pp. 1-4.


Educational Foundation of the National Restaurant Association, (1992). Applied


Foodservice Sanitation, (4th ed.). Kendall/Hund Publishing Company.


Kay, Michael Z., Murphy, J. William, and Harris, Jeffrey S. (1994 January/February).


How to Zap Your Workers’ Comp Costs Financial Executive, pp. 44-48.


Stephenson, Susie. (1993, October 1). TQM: Making it Work for You Restaurants


& Institutions, pp. 109-111.


TechniCAL. HACCP: A Principle Whose Time has Come Available: http://www.tcal.com/haccp.htm


p 1.

Сохранить в соц. сетях:
Обсуждение:
comments powered by Disqus

Название реферата: Tqm Essay Research Paper TQM in Foodservice

Слов:1840
Символов:12893
Размер:25.18 Кб.